- 41 -
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
4. TROUBLE SHOOTING
START
Re-download SW or
Do calibration again
HP8960 : Test mode
37 CH, 7 level setting (TCH)
37 CH, -60dBm setting (BCCH)
Spectrum analyzer setting
Oscilloscope setting
(1) Check
Crystal Circuit(TP1, 2)
(2) Check
Mobile SW &Rx Saw(TP3,4,5,6)
(3) Check
RX I/Q Signal(TP7,8)
CHECKING FLOW
4.2 RX Trouble
To Next Page
Loading...
