Operation
Self Test
Ice Making
• To make ice cubes, fill the ice
tray to the water level and place
it in the freezer.
• If ice cubes are required fast,
set the ‘SUPER FRZ.’ state.
• To remove ice cubes, hold the
tray at its ends and twist gently.
Tip
To remove ice cubes easily, run water on the tray
before twisting.
Defrosting
Defrosting takes place automatically.
The defrosting water flows down to the evaporating tray
and is evaporated automatically.
21
• This function automatically detects failure when failure
is found in product during the use of refrigerator.
• If the failure occurs at product and it does not operate
by pressing any button and normal indication is not
done, do not turn the power off and immediately
contact with the local service center.
• A lot of time is needed for service engineer to detect
the failed part by turning it off.
Memory feature
Function to save the set temperature and vacation status
When the power is turned on after the power failure, it
will be restored with the set temperature and vacation
status.
To Next Page
Loading...
Need help?
General
