To Next Page

To Previous Page

PROGRAMMING MODE

PROGRAMMING MODE - Test Mode

Diagnostic tests : (display)

This program has been added for testing the dryer and detecting errors.

Entering the test mode

Machine

Data

Name

Button Display Description

CARD /

COIN

Enter-

ing

the test

mode

1. Entering

programming

mode

Insert service card (card type), Turn on/o toggle switch

(Coin type).

2. High Temp.

Press the High Temp. button.

Then

appears in the display.

3. Start

Enter the diagnostic test mode.

OPL

1. Entering

programming

mode.

Push and hold the High Temp. and Low Temp. at the same time.

After that push Med Temp. button for 3 times. Push Start but-

ton.