OUTDOOR UNIT INSTALLATION
ENGLISH
17
• Lift the unit by using a crane rope to the carrying hole in the bottom base of the outdoor unit.
• Avoid scratches or distortion on the external panel with protective support when suspending.
• There is a risk of dropping when the unit is hoisted by a forklift. Do not hoist the unit forcibly
when it is off balance.
• Make sure to use a rope long enough so that the distance between the top of the outdoor unit
and the hook can be more than 1 m.
• Make sure to use the proper ropes strong enough to support the weight of the outdoor unit.
• The use of improper ropes may result in dropping.
• Always transport the outdoor unit upright (vertically). It is dangerous to transport the outdoor
unit flat (horizontally) and it may also cause a malfunction.
• When carrying, place the forks of the forklift into the carrying hole for forklift.
CAUTION
Pay special attention when carrying the unit.
• The PP bands (PET bands) are used for packing. It is dangerous to use the PP bands to
transport the unit.
• Do not touch the heat exchanger fins with your bare hands. You can get a cut in your
hands.
• Tear apart and throw away plastic packaging bags so that children will not play with them.
Children playing with plastic bags face the danger of suffocation.
• When carrying the outdoor unit, be sure to support it at four points. Carrying it with 3-point
support may make the outdoor unit unstable and fall.
• Hoist the unit making sure it is being lifted at its center of gravity.
!
OUTDOOR UNIT INSTALLATION
Outdoor Unit Transportation
To Next Page
Loading...
