LG GHP SUPER - Page 61

ADDITIONAL FUNCTIONS
ENGLISH
61
Outdoor Unit Address Setup
It is an address setup function for the outdoor unit in order to distinguish the outdoor units from
each other when installing the central control system.
Mode Setup
Dip switch #5 of the outdoor unit ON
Display "Func" on 7-segment using '▶', and
'◀' buttons, and press the '●' button.
Display "Fn5" on 7-segment using '▶', and
'◀' buttons, and press the '●' button.
Display one of "0"~'255" on 7-segment using
'▶', and '◀' buttons, and press the '●' button.
Outdoor Unit Address Setup
CAUTION
• Ask the licensed installer for the function setup when installing the outdoor unit.
• If the central control system is not installed, there will be no change even after the mode
setup.
!