LG GHP SUPER - Page 75

REGULAR MAINTENANCE
ENGLISH
75
Reset the oil system operation timer
- It resets a timer after the engine oil change.
Be sure to reset only after the engine oil change during the regular maintenance.
- Reset the engine oil change timer
Prepare tools and oil
/oil filter preparation
Refill the
engine oil
Drain out the
engine oil
Check the engine
operation
Check
the oil level
Reset the oil system
operation timer
Replace the engine
oil filter
Make sure to reset the timer only after the
engine oil change.
(filter and air cleaner replacement should be
done together)
Dip switch (outdoor unit) setup
When “OiL” displays, press the ‘●’ button
for 3 seconds.
When ‘no’ sign turns on, press the ‘▶’,‘ ◀’
buttons to display “init” on the 7-segment.
And then press the ‘●’ button for 3 seconds.
Timer resets after “done” displays.
CAUTION
This function must be performed only after the engine oil replacement.
!