17
HUMIDITY CONTROLLED CRISPERS
The crispers provide fresher tasting fruit and vegetables
by letting you easily control humidity inside the drawer.
You can control the amount of humidity in the
moisturesealed crispers by adjusting the control to any
setting between VEGETABLES and FRUIT.
ţ VEGETABLES keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
ţ FRUIT lets moist air out of the crisper for best storage
of fruit.
To remove and install the crisper drawers:
1. Pull the crisper drawer out to the drawer stop.
2. Lift the front of the crisper up, then pull it straight out.
3. To install, slightly tilt up the front, insert the drawer into
the frame and push it back into place, past the drawer
stop.
To remove the crisper glass:
1. Remove the crisper drawers (as described above).
2. Reach in under the glass and lift up.
3. Gently push the glass up and out.
To remove the crisper cover:
1. Remove both crisper drawers.
2. Remove the crisper glass.
3. While holding the support and crisper cover, pull up
and out.
DOOR BINS
The door bins are removable for easy cleaning and
adjustment.
1. To remove the bin, simply lift the bin up and pull
straight out.
2. To replace the bin, slide it in above the desired support
and push down until it snaps into place.
NOTE: Some bins may vary in appearance and will
only fit in one location.
DAIRY BIN
1. To remove the Dairy Bin, simply lift up and pull out.
2. To replace the Dairy Bin, slide it in above the desired
support slots and push down until it stops.
To Next Page
Loading...
Need help?
General
