LG GR-382R Service Manual

9
3. Product Disassemble.
Doors
Freezer Door
1. Remove hinge cover by pulling it
upwards.
2. Loosen the hexagonal bolts that
hold the upper hinge in place. See
Figure 1.
3. Remove door. See Figure 2.
Figure 2
Figure 1
Figure 4
Figure 3
4. Pull gasket to remove it. See
Figures 3 and 4.
Refrigerator Door.
1. Loosen the hexagonal bolts that
hold the central hinge in place.
See Figure 5.
2. Remove refrigerator door. See
Figure 6.
3. Pull out the gasket to remove it
from the door. See Figure 4 from
Freezer door.
Figure 6
Figure 5
Door Switch
1. Pull out the door switch out using
a flat head screwdriver. See
Figure 7
2. Disconnect all switche's cables.
See Figure 8
Figure 7
Figure 8
Control Circuit ( Display PWB)
1. Remove the lamp cover by
inserting a screwdriver in the lower
side's holes. See Figure 9.
2. Loosen and remove the 2 screws.
See Figure 10.
Figure 9 Figure 10
3. Pull out the Control Box. See
Figure 11.
4. Disconnect the connector from the
cable terminal. See Figure 12.
5. Remove the EPS Multi air duct
(insulation) from the control box.
6. Detach the electronic control
(Display, PWB). See Figure 13.
Figure 11
Figure 12

LG GR-382R Specifications

General

Brand	LG
Model	GR-382R
Category	Refrigerator
Language	English