6. WATER TANK AND WATER LINE
u The water tank at back and lower part of a refrigerator is
fixed by one screw and has a capacity containing 7
glasses (180cc per glass) of cold water. It will take time
to make more cold water in the tank.
*
The first portion of dispensed water is not cold even
though the refrigerator is working. In this case,
dispense ice first in the cup and then water to make a
cold water.
7. HOME BAR
7-1. Home Bar related parts
7-2. Home Bar parts disassembly and assembly
1) Disconnect H/Bar Door Assy a.
2) Loosen two screws g attached on the refrigerator
compartment door with a phillips screwdriver. And
loosen 4 screws b and two screws c. Pull H/Bar door
Assy a. forward to disassemble.
3) Loosen two screws j, i fixed on H/Bar door Assy. and
two screws k with a cross driver to disassemble arm
Assy.
4) Assemble parts by performing the disassembly in
reverse order.
Note :
• Assemble carefully parts
g
,
j
,
k
until they are
fixed firmly when assembling them.
• Adjust exterior gap by adjusting parts
b
,
g
and
when assembling.
HOW TO DISASSEMBLE AND ASSEMBLE
- 103 -
1 DOOR ASSY, H/BAR 7 SCREW TAP TITE(ARM)
2
SEREW, TAP TITE(HINGE-H/B)
8 ARM ASSY
3
SCREW MACHINE(HINGE-H/B)
9 STOPPER
4 HINGE ASSY H/BAR 10
SCREW, MACHINE(STOP ARM-H/B)
5 HINGE ASSY H/BAR 11
SCREW MACHINE(HINGE-H/B)
6 CAP, ARM