Timer
– The self-timer allows
you to set a delay after the
shutter is pressed. Select
Off
,
3 seconds
,
5 seconds
, or
10
seconds
. This is ideal if you want
to be included in a photo.
ISO
– The ISO rating determines
the sensitivity of the camera’s
light sensor. The higher the ISO,
the more sensitive the camera
will be. This is useful under
darker conditions when you
cannot use the flash. Select from
ISO values of
Auto
,
100
,
200
,
and
400
.
Scene mode
– Choose from
Auto, Portrait, Landscape,
Sports, Night,
and
Sunset.
Color effect
– Choose a colour
tone for your new photo.
Once you’ve made your
selection, use the
Back
key
to close the colour tone menu.
You are then ready to take a
picture.
NOTE:
You can change a colour
picture to black and white or
sepia, but you cannot change a
black-and-white or sepia picture
to colour.
Captured image
– Choose from
Hold, On,
and
Off.
If you select
Hold
, after taken picture screen
is shown for 1 second, and it
goes to the preview right away.
Grid screen
– Choose from
Off
,
2x2
, or
3x3
.
Shutter sound
– Select one of
the four shutter sounds.
GEO-Tagging
– Activate to use
your phone’s location-based
services. Take pictures wherever
you are and tag them with the
location. If you upload tagged
pictures to a blog that supports
geotagging, you can see the
pictures displayed on a map.
NOTE:
This function is only available
when GPS is active.
Camera
GT540 MR_UK Open_1.0 1021.indd 52 2010.10.21 9:51:34 PM
To Next Page
Loading...
