With Wi-Fi, you can use
highspeed Internet access within
the coverage of the wireless
access point (AP).
You can enjoy wireless Internet
with Wi-Fi, without extra charges.
NOTE:
• If you are out of Wi-Fi area and
choose 3G connection, additional
charges may be applied.
• If your phone turns into sleep
mode even when it is connected
to Wi-Fi, the Wi-Fi connection will
be disabled automatically. In this
case, if your phone has access
to 3G data, it may be connected
to the 3G network automatically,
and additional charges may be
applied.)
• The GT540 supports WEP and
WPA/WPA2-PSK security. If your
Wi-Fi service provider or network
administrator sets encryption
for network security, fill in the
key in the pop-up window. If
encryption is not set, this pop-up
window will not be shown. You
can obtain the key from your
Wi-Fi service provider or network
administrator.
1. How to set up Wi-Fi
1
Touch
Application > Settings
> Wireless & networks
, then
turn
Wi-Fi
on.
2
AP (Access Point) Search
– Searches for which AP it
can connect to.
3
AP Connect
– Connects to the desired AP
from the AP search list.
– If the AP is security type
WEP or WPA/WPA2-PSK,
enter the security key.
2. Wi-Fi network profile
support
1
Wi-Fi profile support (how to
connect to a frequently used
AP or hidden AP)
1) If the AP does not appear
in the search list, you can
connect to it by saving it as
a profile.
Wi-Fi
GT540 MR_UK Open_1.0 1021.indd 84 2010.10.21 9:51:45 PM
To Next Page
Loading...
