- 132 -
10. RF Calibration
Notices:
1. The state of Phone is “test mode” during the CALIBRATION.
2. Calibration program automatically changes either “normal mode” or “ptest mode”.
3. RF Calibration steps as follow:
TX Channel compensation: EGSM->DCS->PCS->EDGE EGSM->EDGE DCS->EDGE PCS
RX Channel compensation: EGSM->DCS->PCS
4. Phone Operation Mode
LGE Internal Use Only
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Normal Mode ptest Mode
To Next Page
Loading...
