Directview LCD Training 36 Firmware Updates
FIRMWARE UPDATES
Current TV Software version: 3.08 (date: 5/5/2005)
The following new software is found in the memory card.
File: 42LP1DU_V313_rom.epk
- Main Software: 3.13
UPDATE INSTUCTIONS - NORMAL METHOD
1) Copy the Firmware update to the memory card. This has already been done for you if the card
came from LG Customer Service. The firmware file will have the file extension “.epk”. Only copy
the firmware update for your model TV.
2) Turn the TV on and insert the memory card into the TV. If the firmware on the card is newer than
the firmware in the TV, the following will be shown:
4) The TV will show the following messages when the firmware update is complete:
5) Press ENTER. After restarting, the TV is ready to use.
3) Press ENTER on the remote to begin the firmware update. The TV will restart automatically and
show the progress of the update. Do not remove the memory card or remove power from the
TV until complete.
Reading the file...Done
Main Software: Upgrading...22 Percent
Reading the file...Done
Main Software: Upgrading...Done
The software upgrade has been successfully completed.
Press ENTER to restart the TV now.
The TV will restart automatically in 14 seconds.
To Next Page
Loading...
