Directview LCD Training 79 CableCARD
CABLECARD
Cable Operation Confirmation
(1) Confirm that the Cable Card is inserted in the slot.
(2) Enter the EZ adjust menu by pressing the Adjust key on the Service Remote Control (S R/C).
(3) Go to number 2 Cable Check and press the Right key (%).
(4) Confirm items below.
NAME NORMAL DEFECTIVE
Descrambler
Check
OK Not OK
CableCARD
CableCARD is
removed
CableCARD is
inserted
OOB Path Locked - OK
Unlocked - Not
OK
FDC_SNR
20bd or more -
OK
Under 20db - Not
OK
Video Signal Normal Screen Black Screen
CableCheck
1 Descrambler Check OK
2 CableCARD CableCARD is inserted
3 OOB Path OK (Lock)
4 FDC_SNR OK (23 db)
To Next Page
Loading...
