Directview LCD Training 84 CableCARD
CABLECARD
4
This indicates the state of the IEE1394 and DVI ports and connection
settings.
The meter below shows we are looking for 104.20Mhz. What we find is the signal is shifted slightly.
This indicates the signal is not centered on 104.20Mhz. The OOB tuner is told to look for the data on
104.20Mhz but the data is actualy on 104.25Mhz. This is enough shift to prevent the card from
receiving the data it needs from the headend. This signal is not allowed this much variation.
To Next Page
Loading...
