LG LB8000R - Preparation of Chassis; Removing Shipping Screws; Sliding Unit from Cabinet; Attaching Guides and Curtains

Installation
1, Remove [he screws which fasten the cabinet
at both sides and at the back,
Use a long screwdriver and installing the
screws wi]] be easier.
2. Slide the unit from the cabinet by gdpping the
base pan handlUe and pulling forward while
bracing the cabinet,
3. Cut the window sash seal to the proper
length,
Peel off the backing and attach the Foam-Pe
to the underside o,f the window sash.
.
5_
Remove the backing from the top, Uipper Guide
Foam-PE and attach it to the bottom of the
Upper Guide
Attach the Upper Guide onto the top o,f the
cabinet with 3 Ty_ A screws.
6. ]nse#, the Frame Guides into the bottom of
the cabinet.
,
Insert the Frame CuRain into. the Upper Guide
and Frame Guides,
8. Fasten the cu_ains to the unit: with 4 Type
Feamope
(Ty£e A) upperG_side
_rew
_o
Foam-Pe
14 Re,ore Aft Conditioner