LG LCW-007 - Installing the LG ThinQ Application; Connecting to Wi-Fi; Initial Appliance Registration; Re-registering the Appliance or Registering Another User

28
SMART FUNCTIONS
NOTE
• If the rewall on your wireless router is enabled,
disable the rewall or add an exception to it.
• The wireless network name (SSID) should be a
combination of English letters and numbers. (Do
not use special characters.)
• Smartphone user interface (UI) may vary
depending on the mobile operating system (OS)
and the manufacturer.
• If the security protocol of the router is set to
WEP , you may fail to set up the network. Please
change it to other security protocols (
WPA2 is
recommended) and register the product again.
Installing the LG ThinQ
Application
Search for the LG ThinQ application from the
Google Play Store or Apple App Store on a
smartphone. Follow instructions to download and
install the application.
Connecting to Wi-Fi
The Wi-Fi button, when used with the LG ThinQ
application, allows the appliance to connect to a
home Wi-Fi network. The Wi-Fi indicator shows the
status of the appliance’s network connection. The
Wi-Fi indicator illuminates when the appliance is
connected to the Wi-Fi network.
•
Initial Appliance Registration
Run the LG ThinQ application and follow the
instructions in the application to register the
appliance.
•
Re-registering the Appliance or Registering
Another User
Press and hold the Wi-Fi button for 3 seconds to
temporarily turn it o. Run the
LG ThinQ
application and follow the instructions in the
application to register the appliance.
NOTE
• To disable the Wi-Fi function, press and hold the
Wi-Fi button for 3 seconds. The Wi-Fi indicator
will be turned o.
Wireless LAN Module
Specifications
Wireless function S/W version: V 1.0
For consideration of the user, this device should be
installed and operated with a minimum distance of
20 cm between the device and the body.
Open Source Software Notice
Information
To obtain the source code that is contained in this
product, under GPL, LGPL, MPL, and other open
source licenses that have the obligation to disclose
source code, and to access all referred license
terms, copyright notices and other relevant
documents, please visit https://
openso
urce.lge.com.
LG Electronics will also provide open source code to
you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to opensource@lge.com.
This oer is valid to anyone in receipt of this
information for a period of three years after our
last shipment of this product.
Model LCW-007
Frequency Range
Output Power
(Max.)
IEEE 802.11 b: 17.59 dBm
IEEE 802.11 g: 17.39 dBm
IEEE 802.11 n (HT20): 16.64
dBm
IEEE 802.11 n (HT40): 17.05
dBm
global_main.book.book Page 28 T hursday, December 15, 2022 8: 16 AM
2412 - 2472 MHz
The LG Electronics declares that the type of radio
equipment Refrigerator corresponds to the Technical
regulations of radio equipment. The full text of the
Declaration of Conformity is available on the website
at the following address: https://www.lg.com/global/
support/cedoc/cedoc.