What to do if my LG LDB454 displays the OE error?
If your LG Dishwasher shows the 'OE' error, it means there's a drainage problem. You should check the water drain hose for clogs, kinks, or freezing. Also, inspect the air gap or garbage disposal for any blockages and clean them if necessary. Finally, make sure to clean the filters, as clogged filters can also cause this error.
What does CL mean on LG LDB454 Dishwasher?
The code 'CL' on your LG Dishwasher is not an error code. It indicates that the control lock is activated. To deactivate it, press and hold the Half Load and Energy Saver buttons simultaneously for three seconds.
What does the AE error mean on an LG LDB454?
The 'AE' error on your LG Dishwasher indicates a water leakage. Immediately turn off the water supply to the dishwasher. The dishwasher will make an alert sound for 10 seconds and run the drain pump intermittently, and it will automatically power back on until the error is resolved.
What does FE error mean on LG LDB454 Dishwasher?
The 'FE' error on your LG Dishwasher means excessive water is being supplied. Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-888-542-2623 (Canada).
What does HE error mean on LG Dishwasher?
The 'HE' error code on your LG Dishwasher indicates a heater circuit failure. Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-888-542-2623 (Canada).
What does tE error mean on LG Dishwasher?
The 'tE' error on your LG Dishwasher indicates a water temperature sensor error. Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-888-542-2623 (Canada).
What does LE error mean on LG LDB454?
The 'LE' error on your LG Dishwasher indicates a wash motor error. Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-888-542-2623 (Canada).
What does NE error mean on LG LDB454?
The 'NE' error on your LG Dishwasher indicates a vario motor error. Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-888-542-2623 (Canada).
What does P1, Pz, P3, P4 mean on my LG LDB454?
The codes 'P1', 'Pz', 'P3', 'P4' on your LG Dishwasher are not error codes. They indicate the current Download Cycle being used.
What does N:#, U:#, d:#, t# mean on LG LDB454 Dishwasher?
The codes 'N:#', 'U:#', 'd:#', 't#' (where # is a number) on your LG Dishwasher are not error codes. These codes are used when testing the dishwasher. To make the code disappear, power the unit off and then on again.
General| Brand | LG |
|---|---|
| Model | LDB454 Series |
| Category | Dishwasher |
| Language | English |
To Next Page
