To Next Page

To Previous Page

TROUBLESHOOTING

Error Codes

Problem Possible Cause & Solution

Water inlet problem.

Check for a clogged, kinked or frozen water inlet hose.

Check water supply.

Drainage Problem.

Check for a clogged, kinked or frozen water drain hose.

Air gap or disposal is clogged.

Clean air gap or disposal.

Filters are clogged.

Clean Filters.

Oversudsing caused by improper detergent, such as liquid dish soap

Do not use hand dishwashing liquids.Only use detergents which are designed for use in

automatic dishwashers.

A bE error can appear if dishes soiled with a lot of foamy food, such as whipped cream, are

loaded in the appliance. To clear the error, turn the appliance off and start a new cycle.

a shallow bowl, place it in the upper rack and then run the appliance on the Auto cycle.

Failure to level dishwasher.

Make sure that the appliance is properly leveled.

Water leakage

Turn off the water supply to the dishwasher and call an LG Electronics Customer

Information Center at 1-800-243-0000 (U.S.A.) or 1-888-542-2623 (Canada).

The dishwasher makes an alert sound for 10 seconds, and runs the drain pump

intermittently. If power is turned off to the machine, the machine powers back on

automatically until the AE error is resolved.

Excessive Water supplied.