7PRODUCT OVERVIEW
ENGLISH
PRODUCT OVERVIEW
Product Features
The images in this guide may be different from the actual components and accessories, which are subject
to change by the manufacturer without prior notice for product improvement purposes.
• For your safety and for extended product life, use only authorized components. The manufacturer is not
responsible for product malfunction or accidents caused by the use of separately purchased
unauthorized components or parts.
• Do not remove the safety cover at any time.
• To ensure reliability, each LG dishwasher goes through thorough quality control before it leaves the
factory.
• You may find water droplets or water spots from this process inside your new dishwasher.
Front View
a Control Panel & Door Handle
b Front Cover
c Lower Cover
d Leveling Feet
e Base
f SignaLight
TM†
g Safety Cover
h Shipping Brace
† This feature is only available on some models.
SignaLight
TM
(Front Display)
The top-control models have 3 indicator LEDs
centered at the top of the front cover.
• Red: Error (See the Error Codes in
Troubleshooting section.)
• White (steady): Normal operation.
• White (blinking): Cycle has been paused. (After
four minutes in pause mode, the machine turns
off.)
• Green: Cycle finished normally.
The default ON setting keeps the green light on
until the door is opened. If the setting is changed
to OFF, the green light turns off after 90 seconds.
To change the setting, turn the power on and
press and hold the High Temp. button for 3
seconds until ON or OFF appears in the display.
The setting is stored until you change it.
Interior View
To Next Page
Loading...
Need help?
General
