For Authorized Service Technicians
- 40 -
PCB Cover
6) Removing Main PCB
① Press the hook and remove the PCB.
② Remove the screw and take the PCB
Cover off.
③ Disconnect the connector.
※ Use care and move slowly when pulling
out the main PCB.
¤ ¥
£
VORW
KRRN
KRRN
¢
£
※ Attaching the Fire Retardant Sheet
① Remove backing from double sided tape
② Put the hook through the slot and
attach the sheet up to the red line
③ Fold the remaining part of the sheet
④ Assemble the Safety Cover
※ For This Model Only
(LUDP8997**)
Main PCB
To Next Page
Loading...
Need help?
General
