LG LE50 - Fn Key Combinations

16
 Fn key combinations
The following table shows the function of each combination of Fn with a function key.
Function of Fn keys has nothing to do with Operating System.
Ch3. System information
Insert [Fn] + Delete
Num Lock
[Fn] +
ScrLk(NumLk)
Darken the LCD (9 Steps). [Fn] + End
Brighten the LCD (9 Steps).[Fn] + Home
Maximum power-saving mode. (When OSD is installed.) [Fn] + [F12]
CPU Cooling Fan control mode (Normal / Slow / Fast)[Fn] + [F11]
System information. [Fn] + [F10]
LCD Auto Brightness control Enable/Disable.
Enable/disable Auto Brightness control. (ON/OFF)
•Refer to Battery Miser Help.
[Fn] + [F9]
Audio Enabe/disable
•Refer to Battery Miser Help.
[Fn] + [F8]
The computer display becomes darker. [Fn] + [Insert]
The computer display becomes brighter. [Fn] + [Delete]
Monitor toggle.
When the computer is attached to an external monitor, you can change the display output location with
[Fn] + [F7] combination.
You can switch to and from the three types of display modes, LCD display only, the external monitor
only, or both at the same time.
[Fn] + [F7]
Wireless LAN Enable/Disable Toggle. [Fn] + [F6]
Press the combination once to disable the touch pad, and press again to enable the touch pad.
(The touch pad initialization takes 1~2 seconds, so wait for the initialization to end before using the
touch pad)
[Fn] + [F5]
Force the computer to enter power-saving mode. (ex: system standby and hibernation) [Fn] + [F4]
User defined Hot key. (Setting is available at OSD) [Fn] + [F3]
User defined Hot key. (Setting is available at OSD) [Fn] + [F2]
User defined Hot key. (Setting is available at OSD) [Fn] + [F1]