- 30 -
8-2-7 Temperature compensation & overcooling/undercooling compensation circuit
Table of temperature compensation by cutting JUMP WIRE
to easy SVC temperature adjustments
+1deg, +1deg, -1deg, -1deg.
Four oprion are available for R Compensations by CUTTING
JUMP WIRE.
Example 1) CUTTING JCR1 and JCR2: R +2 deg
compensation
Example 2) CUTTING JCR1 and JCR3: no compensation in
R compartment.
Example 3) CUTTING JCR1, JCR2 and JCR3:
compensation of temp +1deg +1deg = +1deg.
8-2-9 Key Button Input & Display Light-On Circuit
"The circuit shown above determines whether a function control key on the operation display is pushed. It also turns on the
corresponding function indication LED (LED Module) SEVEN SEGMENT DISPLAY (SEVEN SEGMENT DISPLAY
MODULE). The drive type is the scan type
To Next Page
Loading...
