LG LFC20760SW - 3-5 DOOR GASKET REPLACEMENT; 3-6 DOOR ALIGNMENT

- 7 -
3-5 DOOR GASKET REPLACEMENT
1. Insert gasket bracket clips
1) Insert gasket bracket edge beneath door frame edge.
2) Turn upper gasket bracket spring so that both spring
ends are in the door channel.
3) Push in clip until you hear it snap securely into place.
4) Push in remaining two clips until you hear each snap
securely into place.
Note:
Make sure that no part of gasket bracket edge
protrudes from beneath door frame edge.
Gasket
Bracket Clip
Spring
Door
Frame
Correct Incorrect
2. Insert gasket into channel
1) Snap gasket assembly into the door bracket.
<Inserting the Gasket Assembly into the Bracket Door>
2) Press gasket into channels on the three remaining
sides of door.
Correct
Incorrect
3) Replace door frame cover
Starting at top of cover and working down, snap cover
back into door.
3-6 DOOR ALIGNMENT
If the space between your doors is uneven, follow the
instructions below to align the doors:
1. With one hand, lift up the door you want to raise at
middle hinge.
2. With other hand, use pliers to insert snap ring as shown.
3. Insert additional snap rings until the doors are aligned.
(Three snap rings are provided with unit.)