GLIDE- OUT DRAWER BASKET Tray can be easily removed by pressing and pulling it.
(on some models)
1. To remove, lift basket up and pull out straight out.
2. To Install, pull both rails out to full extension.
Hook the basket supports into the rail tabs and push to
the back of compartment,
Tilt up the front of tray slightly and snap the ribs into the
holes to replace the tray.
Ribs
FILTER (on some models)
It displays in months the number of months left to
exchange the filter from the moment power is connected
to the refrigerator.
WATER DISPENSER
Push the dispenser pad with a glass until you hear a click
to get cold water.
Dispenser Switch
Push
If you have changed the filter after 6 months of use, press
and hold the FILTER button 3 seconds or more and the
filter display will be initialized with a buzzing sound.
NOTE: The average life of the filter is 6 months.
24
To Next Page
Loading...
