3-5 MULTI DUCT
1. Remove an upper and lower Cap by using a flat screwdriver, and loosen 2 screws.
2. Disconnect the lead wire on the botton position.
3-4 CONTROL BOX-REFRIGERATOR
CONTROL BOX
COVER LAMP
1. First, remove all shelves in the refrigerator, than remove the Refrigerator control Box by loosening 2 screws.
2. Remove the Refrigerator Control Box by pulling it downward.
3. Disconnect the lead wire on the right position and separate the lamp sockets.
- 8 -
To Next Page
Loading...
