• Mount door supports (1) into the tabs on the railing
•
Push the drawer down into position and tighten the
• Compare the left and right rail covers on each side.
1
2
3
track (2), starting in the back first and then connecting
the part in the front last, as shown in the figure.
screws (3).
Right
Rail
Left
Rail
• Align the top holes of the rail cover with the top holes of
the door supports to mount the cover.
• With the drawer fully extended, insert the lower basket
over the front part of the rail assembly and then the
WARNING: To prevent entrapment risk and accidental
child or animal suffocation, DO NOT permit them to
play inside of the drawer.
WARNING: DO NOT step ot sit on the Freezer Door.
alignment
Verify the hole’s
4
back part (4).
- 15 -
To Next Page
Loading...
