19 INSTALLATION
Assembling the Freezer Drawers
The top, middle and bottom drawers are all
assembled in the same way.
1
Using two hands, pull out both rails
simultaneously until they are fully extended.
2
Grasp the drawer on each side and hook the
drawer supports into the rail tabs located on
both sides.
3
Reinstall the bar in the drawer supports.
4
Lower the door into its nal position and
tighten the screws located on both sides.
5
W ith the drawer pulled out to full extension,
insert the lower basket in the rail assembly.
2
1
CAUTION
Do not hold the handle when removing or
replacing the drawer. The handle may come
o and it could cause personal injury.
3
ENGLISH
To Next Page
Loading...
