REFRIGERATOR INSTALLATION
REFRIGERATOR INSTALLATION
HOW TO REMOVE AND INSTALL THE PULL OUT
DRAWER (CONT.)
2. Installing Pull out Drawer
IMPORTANT: To avoid possible injury, product or
property damage, you will need two people to per-
form the following instructions.
• With both hands, hold the center of the bar and
pull it out to let both rails out to full extension
simultaneously. (Fig. 7)
• Hook door supports into rail tabs. (Fig. 8)
Rail tabes
Door Supports
Fig. 8
• Lower door into final position and tighten the
screws. (Fig. 9)
• With the rails pulled out to full extension, insert
the durabase in the rail assembly. (Fig. 10)
Durabase
Fig. 10
WARNING: To prevent accidental child and pet
entrapment or suffocation risk, DO NOT allow them
to play inside of drawer.
WARNING: DO NOT step or sit down on Freezer
Drawer.
To Next Page
Loading...
