Appendix
Page 4
How to Service (Case① Mullion is normal. But not working.)
Step1) Check the level of product
Step2) Raise the left door(Dispenser door)
Step3) To level the doors, insert a snap ring around the
pin of the hinge(Right door),
Step4) Check if the mullion works normally and the doors are even
If the doors are even, you can skip this step
.
If the doors are not even.
Mullion is normal Not working due to missing Holder, Door
Before After
clockwise
counter clockwise
If you turn clockwise, product will be raised.
If you turn counter clockwise, door will be raised.
Max 3ea
snap ring
To Next Page
Loading...
