-93-
- 92-
13. ICEMAKER OPERATING METHOD AND TROUBLE SHOOTING
13-1 Icemaker’s Basic Operating Method
nO rewoPnO rewoP
Start Position
Icemaking
Mode
Full Ice
Check
Harvest
Mode
Full Ice?
Fill
Test Mode
FILL Key
Harvest
ė
Fill water
ė
Ice making
To reset the icemaker’s operation, set the power switch OFF position and back it to ON position.
Icemaker Unit
Ć
Ice Tray on a slightly tilt
13-2 ICE MAKER FUNCTIONS
13-2-1 Icemaking Mode
Ć
13-2-2 Harvest Mode
Ć
13-3 Trouble Shooting Ice & Water system Issues
13-3-1 Icemaker not making ice or not making enough ice (Environmental Diagnosis)
�
Ć
Test Mode should not be carried out before checking below.
13-2-3 Fill/Park Position
Not making ice
Water
Yes
Yes
No
No
No
Temperature
Time
Is Icemaker’s tray filled
with water or Ice?
Is measured
temperature below 10°F
in the icemaker
compartment
How long has customer
waited for icemaker to
make ices?
ė saddle valve.
ė fill tube heater
ė all the water valve’
connection.
ė Icing fan is working.
multi duct is blocked
ė Measure the temp. gas leakage
If the issue haven’t resolved yet, though you have checked all the items above, go to next step.
To Next Page
Loading...
