17INSTALLATION
ENGLISH
3  Remove the cover and pull out the tube h. 
Disconnect all wire harnesses i. Unscrew the 
ground wire 
j.
4  Rotate the hinge lever k counterclockwise. 
Lift the top hinge l  free of the hinge lever 
latch 
m.
• When lifting the hinge free of the latch, be 
careful that the door does not fall forward.
5  Lift the door from the middle hinge pin and 
remove the door.
• Place the door, inside facing up, on a 
nonscratching surface.
Removing the Right Refrigerator 
Door
• The number of wire harnesses may vary 
depending on the model.
• Ground wire is only present on some models.
1  Remove the top hinge cover screw a. Lift the 
hook (not visible), located at the bottom of the 
front side of the cover b, with a flat-head 
screwdriver.
2  Detach all the wire harnesses c. Unscrew the 
ground wire d.
3  Rotate the hinge lever e clockwise. Lift the 
top hinge 
f free of the hinge lever latch g.
• When lifting the hinge free of the latch, be 
careful that the door does not fall forward.