LG LH51 Series - Connecting USB Storage Devices

18
ENGLISH
No. Description
1
Current time.
2
Current preset number.
3
Audio mode. (Stereo, Mono, Forced Mono)
4
Current radio frequency.
5
Available buttons on the remote control.
3 Press the
button on your remote control to view your Preset
List.
Button Description
Play the selected preset.
Enter edit mode.
Skip/Unskip the selected preset.
Exit.
4 Select a Preset and then press the
button to change its
frequency.
Button Description
Edit the selected preset by search.
Edit the selected preset by ne.
Edit complete.
Exit.
Entertainment
(Depending on model)
* Image shown may dier from your TV.
Connecting USB storage devices
Connect USB storage devices (USB memory) to the TV and use
multimedia features (See “Browsing les” on page 19).
Connect a USB ash memory or USB memory card reader to the TV as
shown on the following illustration.
USB IN
To disconnect a USB storage device, make sure to end the connection
properly to prevent damages to the TV or les.
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to Eject and press OK
.
3 Disconnect the USB storage device only when the message says that
it is safe to remove.
CAUTION
• Do not turn the TV o or remove a USB storage device while the
USB storage device is connected to the TV, as this could result in
loss of les or damage to the USB storage device.
• Back up your les saved on a USB storage device frequently, as you
may lose or damage the les and this may be not covered by the
manufacturer’s warranty.
Tips for using USB storage devices
• Only a USB storage device is recognizable.
• If the USB storage device is connected through a USB hub, the
device is not recognizable.
• A USB storage device using an automatic recognition programme
may not be recognized.
• A USB storage device which uses its own driver may not be
recognized.
• The recognition speed of a USB storage device may depend on
each device.
1
5