LG LH51 Series - Time Settings

28
ENGLISH
Stereo/Dual Reception
When a programme is selected, the sound information for the station
appears with the programme number and station name.
Press I/II button to select the Multi Audio menu.
Broadcast On Screen Display
Mono
Stereo
Dual
MONO
STEREO
DUAL I , DUAL II , DUAL I + II
NICAM
NICAM
 Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to
mono. In mono reception, the clarity of sound is improved.
 Language selection for dual language broadcast
If a programme can be received in two languages (dual
language), you can switch to DUAL I, DUAL II or DUAL I+II.
DUAL I Sends the primary broadcast language to the
loudspeakers.
DUAL I I Sends the secondary broadcast language to the
loudspeakers.
DUAL I+I I Sends a separate language to each loudspeaker.
Nicam Reception
If the TV is equipped with a receiver for NICAM reception, high quality
NICAM (Near Instantaneous Companding Audio Multiplex) digital sound
can be received.
Sound output can be selected according to the type of broadcast
received.
1 When NICAM mono is received, you can select NICAM MONO or
FM MONO.
2 When NICAM stereo is received, you can select NICAM STEREO or
FM MONO.
If the stereo signal is weak, switch to FM MONO.
3 When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or FM MONO.
Speaker Sound Output Selection
In AV, Component, HDMI mode, you can select output sound for the left
and right loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent to the left
loudspeaker and audio signal from audio R input is sent
to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right
loudspeakers.
R+R: Audio signal from audio R input is sent to left and right
loudspeakers.
TIME settings
1 Press SETTINGS and the Navigation buttons to scroll to TIME.
2 Press the Navigation buttons to scroll to the setting or option you
want and press OK
.
3 When you return to the previous menu, press
BACK
* Image shown may dier from your TV.
OKMove
TIME
Clock
O Time
: O
On Time
: O
Sleep Timer
Automatic Standby
: O
: 4 hours
Move OK
The available time settings are described in the following.
Setting Description
Clock Sets the time.
Off Time /
On Time
Sets the time to turn on or o the TV
automatically. To use this function, you should
set the current time and date in advance.
NOTE
• If you do not press any button within 2
hours after the TV turns on by the On Time
feature, the TV enters the Standby mode
automatically.
• If you set both Off Time and On Time
features to the same time, the Off Time
feature overrides the On Time feature.
Sleep Timer
Sets the length of time until the TV to turns o.
When you turn the TV o and turn it on again,
the Sleep Timer feature will be set to o.
Automatic
Standby
(Depending on
model)
If you do not press any button on the TV or
remote control for a certain period, the TV will
automatically switch to standby mode.