Do you have a question about the LG LMAN097HVP and is the answer not in the manual?
Essential safety guidelines and warnings to prevent injury and property damage during repair and operation.
Details on various indoor and outdoor unit models, including capacity and specifications.
Explanation of model coding for indoor, outdoor, and branch distributor units.
Overview of functions and accessories available for different indoor unit types.
Detailed descriptions of various airflow control functions like auto swing and chaos wind.
Explanation of the PLASMA Air Purifying System for contaminant removal.
Guidance on setting the External Static Pressure (E.S.P.) for optimal installation.
Description of reliability functions like Hot Start and Self-diagnosis.
Features enhancing user convenience, including auto-cleaning, auto-operation, and timers.
Details on advanced functions like Low Ambient Control and Auto Elevation Grille.
Explanation of the basic principle for controlling motor RPM via compressor frequency.
Details on fuzzy control for maintaining evaporating/condensing temperatures.
Explanation of Electronic Expansion Valve operation for superheat control.
Description of the operation for recovering oil accumulated in the pipe.
Process for eliminating ice accumulation on the heat exchanger during heating.
Details on protection mechanisms like high/low pressure and discharge temperature.
Pre-run checks including refrigerant leakage and proper connection of power/transmission cables.
Visual flowchart for conducting the operational test of the unit.
Step-by-step guide for performing test runs on different unit types.
Information on error codes and indicators for indoor and outdoor units.
Steps to gather refrigerant into the ODU for leakage checks or replacement.
Procedure for removing air and moisture from the refrigerant circuit using a vacuum pump.
Instructions for charging refrigerant into the system after evacuation.
Analysis of issues related to refrigerant cycle performance based on temperature difference.
Guides for diagnosing issues with the product not operating or remote controller problems.
Diagnostic steps for common outdoor unit errors and their causes.
Step-by-step instructions for replacing the Printed Circuit Board (PCB).
| Cooling Capacity | 9, 000 BTU/h |
|---|---|
| Power Consumption (Cooling) | 750 W |
| Energy Efficiency Ratio (EER) | 12.0 |
| Seasonal Energy Efficiency Ratio (SEER) | 22.0 |
| Refrigerant | R410A |
| Sound Level (Indoor) | 19 dB |