34
LIGHT BULB REPLACEMENT
wWARNING
Electrical Shock Hazard
• Before replacing a burned-out light bulb, either
unplug the refrigerator or turn off power at the circuit
breaker or fuse box.
NOTE: Moving the control to the OFF position does
not remove power to the light circuit.
NOTE:
• Not all appliance bulbs will fit your refrigerator. Be
sure to replace the bulb with one of the same size,
shape and wattage.
• The light bulbs will turn off if door is left open for
seven continuous minutes. Shutting door for one
second will light bulbs to come back on.
To change freezer light:
1. Unplug refrigerator power cord form outlet.
2. Using a flat instrument, gently pry the lamp cover
loose in the front as shown. Rotate downward to
remove the rear tabs.
3. Make sure the bulb is cool to the touch. Turn the
bulb counterclockwise to remove.
4. Replace with a new 60-watt appliance bulb.
5. Insert tabs on back of cover into slots in freezer
ceiling. Push cover up to snap front into place.
To Next Page
Loading...
Need help?
General
