HOW10USE
CONTROL PANEL FEATURES
For complete details on button functions, see pages 23-26.
NOTE: The shape of the buttons may not match your model.
li_ LED DISPLAY
The LED display shows the temperature settings,
dispenser options, water filter, door alarm, and locking
status messages.
O ICE TYPE Bu'n'ON
The ICE TYPE button is used to select Cubed Ice or
Crushed Ice.
FREEZERBu'n'ON
Press the FREEZER button to adjust the temperature in
the freezer compartment.
NOTE: When pressed simultaneously with the
REFRIGERATOR button for more than five seconds, the
temperature display will change from Fahrenheit to Celsius
or vice versa.
REFRIGERATOR BuI-rON
Press the REFRIGERATOR button to adjust the
temperature in the refrigerator compartment.
NOTE: When pressed simultaneously with the FREEZER
button for more than five seconds, the temperature display
will change from Fahrenheit to Celsius or vice versa.
ICE PLUS/ENERGY SAVING Bu'n'ON
Press this button to activate the ICE PLUS function to
increase icemaking capabilities.
OR, Press and hold this button for at least 3 seconds to
activate or deactivate the Energy Saving mode.
(_ LIGHT/FILTER Bu'n'ON
The LIGHT/FILTER button controls the lamp in the
dispenser.
Press and hold the LIGHT/FILTER button for more
than 3 seconds to reset the filter indicator after
the water filter has been replaced.
ALARM/LOCK BUTTON
Press this button to control the door-open alarm.
Press and hold this button at least 3 seconds to lock or
unlock all the other function buttons on the control panel,
including operation of the dispenser.
22
To Next Page
Loading...
