Troubleshooting
- COMP Operation Error LED Check
①
1. Open the PCBA Cover
②
2. Check the number of LED blinks
(Refer to the next page for resolution
by number of LED blinks)
③
3. When the COMP is normal,
it will not blink
When the COMP & FAN are not operating simultaneously, force operate from the Main PCB in TEST MODE to check whether it is operating
and then check the power of the COMP end to reset the power.
- 81 -
Copyright © 2018 LG Electronics Inc. All rights
reserved. Only training and service purposes.
To Next Page
Loading...
