LG LMXS28596S - Page 92

Check the Compressor & Harness
1. Check the Harness connection
2. Check the Compressor
Power
off
Check the Resistance
(point A)
Harness Connection
OK
A~B
Connection error
Check the Resistance
(point B)
Check the Resistance
(point D)
Replace
Compressor
B~D
Connection error
Check the Harness
Y
N
N
Y
Y
Y
N
N
Check
Comp. terminal
Harness
failure
Y
N
 Step 1. Power off.
Step 2. Check the Resistance(point A)
Step 3. Check the Harness(INF ohm).
Step 4. Check the Resistance(point B)
Step 5. Check the Resistance(point D)
Y
- 92 -
Copyright © 2018 LG Electronics Inc. All rights
reserved. Only training and service purposes.