LG LN41 Series - Page 2

1. Factory Reset
1.1 When to do Factory Reset?
When you feel any abnormality in Picture and Sound settings, you can use this
function to reset all the settings to initial condition.
1.2 How to do Factory Reset?
Follow below on-screen instructions for Facto ry Reset.
1. Press SETTINGS and th e Navigation buttons to scroll to OPTION .
2. Press the Navigation buttons to scroll to the Initial sett ing and pre ss OK.
3. Select Home Use mode and press OK.
4. Auto Tu ning message window will appear press next and follow instructions.
St ep 1 Step 2 Step 3 Step 4
Note: Changing Mode S etting (Home Use  Store Demo) will reset all Channel
Information and need to st ore all Channel data.
2. Signal Strength Indicator
Use this function to know the quality of RF cable signal.
Signal strength is displayed in channel information window.
A high signal level indicates a good signal quality.
Go od Signal Weak Signal
If picture quality is not good or di storted, use this function to check the signal strength.
Note: If signal strength is low then contact your cable operator.