16
ENG
ENGLISH
ASSEMBLING AND PREPARING
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a
sturdy rope.
Make sure to keep the rope horizontal with the flat
surface.
CAUTION
Make sure that children do not climb on or hang
on the TV.
NOTE
Use a platform or cabinet that is strong and large
enough to support the TV securely.
Brackets, bolts and ropes are not provided. You
can obtain additional accessories from your local
dealer.
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
(Only 32/37/39/42/47/50/60LN54**, LN565*)
(Only LA61**)
P4 x 8
(Only 50LA61**)
M4 x 8 (Only 32/42LA61**)
2EA
CAUTION
(Only LA61**)
How to fix the TV to a table
1. Connect the Desk-mount Cables to the Stand
Base using the Bracket Screws.
2. Fix the Desk-mount Cables to a table using the
Desk-mount Screws.
3. Once the TV is fixed, move the table close to the
wall. Children may go in, causing injuries.
WARNING
To prevent TV from falling over, the TV should be
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the TV
may cause injury.
To Next Page
Loading...
