CARE AND CLEANI NG
Use Drain hose when use the DRY mode
Unplug the air conditioner, disconnect the exhaust hose from the back,
and move the air conditionerto a suitable drain location or outdoors.
You may also place a pan under the drain that will hold up to 3 pints of water.
Remove the drain cap and the rubber plug from the drain outlet.
Once the water collection tank is drained, reinstall the rubber plug and
the drain cap, making sure it is on securely.
Place the air conditioner in the desired location, reconnect the exhaust hose,
and plug in the air conditioner.
When need running in high humidity, or during the DRY mode remove the drain cap and the
exhaust from the back of the unit.
NOTES:
When turned on after being unplugged, the air conditioner will automatically reset to
COOL mode, with a temperature setting of 72°F.
2
1
3
4
Using the bottom drain port
Rubber plug
Drain cap
1
Install a drain hose (11/16" [18mm] inside diameter) and place the open end of the hose a suitable
drain location or outdoors.
2
FL apperars in the display
The water collection tank is full, drain the tank and restart the air conditioner.
EMPTYING THE WATER COLLECTION TANK
24
To Next Page
Loading...
Need help?
General
