To Next PageTo Next PageWhy is the LG LRFXC2606S or Freezer section too warm?
If the LG Refrigerator or Freezer section is too warm, it may be because the refrigerator was recently installed; it can take up to 24 hours for each compartment to reach the desired temperature. Make sure that the air vents are not blocked. Rearrange items to allow air to flow throughout the compartment. Also, try to reduce how often and for how long you open the doors.
What to do if food is freezing in my LG LRFXC2606S Refrigerator compartment?
If food is freezing in the refrigerator compartment of your LG Refrigerator, it might be because food with high water content was placed near an air vent; rearrange these items away from the vents. The refrigerator temperature control may be set incorrectly. If the temperature is too cold, adjust the control one increment at a time and wait for the temperature to stabilize. Also, the refrigerator should not be operated in temperatures below 55 °F (13 °C).
General| Type | French Door |
|---|---|
| Ice Maker | Yes |
| Water Dispenser | Yes |
| ENERGY STAR Certified | Yes |
| Door-in-Door | No |
| Linear Compressor | Yes |
| Smart Cooling System | Yes |
| Color | Stainless Steel |
| Dimensions | 35 3/4" (W) x 68 7/8" (H) x 35 1/4" (D) |
| Smart Features | Wi-Fi Enabled |
General guidance on reading safety instructions before appliance operation.
Potential hazards that can cause death or serious injury if instructions are not followed.
Potential hazards that can cause minor injury or product damage if instructions are not followed.
Instructions for unpacking, choosing a location, and electrical/flooring requirements.
Required space and measurements for proper refrigerator installation and airflow.
Guide for connecting the refrigerator to a water supply for icemaker/dispenser.
Procedures for leveling the refrigerator and aligning doors for proper function.
Explanation of the refrigerator's control panel features and functions.
How to use the ice and water dispenser features.
Instructions for replacing the water filter and flushing the system.
Troubleshooting common cooling problems and their possible causes.
Solutions for problems related to ice making and dispensing.
Troubleshooting issues with water dispensing and quality.
