LG LS-H366NMD0 - Indoor Unit Disassembly (Alternative Models); Grille and Panel Removal

-45-
Warning :
Disconnect the unit from power supply before making
any checks.
Be sure the power switch is set to “OFF”.
1. To remove the Grille from the Chassis.
➊ Remove the 2 screws of right side panel.
➋ Remove the right side panel by the arrow.
■ The connector can be disconnected by pulling it
while pressing the connector's hook.
■ Remove the 1 screw for fixing low panel.
➌ Remove the lower panel by the arrow.
■ Take care not to scratch the wall and mat to
drop.
➍ Remove the left side panel.
(Remove the 2 screws.)
■ LS-M3060HL/CL/BL, LS-M3061HL/CL/BL/AL, LS-M3064HL/CL, LS-M3221HL/CL/BL/AL
LS-N3660HL/CL/BL, LS-N3661HL/BL/CL, LS-N3821HL/CL/BL/AL
Right side panel
Main PCB
Lower panel
Left side panel
Lower panel