Need help?Do you have a question about the LG LS-H126RLN1 and is the answer not in the manual?
General| Cooling Capacity | 12000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Air Flow (Indoor) | 550 m³/h |
| Weight (Indoor Unit) | 8.5 kg |
| Compressor Type | Rotary |
| Type | Split |
Warnings and cautions for installing the air conditioner unit safely.
Precautions for safe operation of the air conditioner, including electrical safety.
Hazards and precautions related to unit installation, removal, and mounting.
Safety measures for using and handling the air conditioner, including cleaning and avoiding foreign objects.
Safety considerations for the installation environment and product handling.
Physical dimensions (W, H, D) for the indoor unit of the air conditioner.
Physical dimensions for the outdoor unit (7k Btu Series) of the air conditioner.
Physical dimensions for the outdoor unit (9k, 12k Btu Series) of the air conditioner.
Guidance on choosing optimal placement for indoor and outdoor units.
Procedures for mounting the installation plate and drilling wall holes for piping.
Detailed steps for performing correct refrigerant pipe flaring.
Steps for connecting indoor unit piping and drain hose through the wall.
Procedures for connecting refrigerant pipes and cables to the outdoor unit.
Guidelines for connecting the power cable to the indoor unit.
Guidelines for connecting the power cable to the outdoor unit.
Checking drainage and forming piping for proper installation.
Procedures for air purging using a vacuum pump for system integrity.
Evacuation process and final steps after air purging.
Steps to perform a test run after installation to verify functionality.
Explanation of indicators and basic control functions for C/O and H/P models.
Detailed operation logic for cooling, dehumidification, heating, and defrost modes.
Explanation of Fuzzy logic operation for cooling, dehumidification, and heating.
Functions related to timers, airflow speed selection, and swing modes.
Details on sleep, chaos, and jet cool modes for enhanced user experience.
Features for automatic restart after power failure and manual forced operation.
Operation of buzzer, air cleaner, and heater features of the unit.
Explanation of various indicators shown on the display for heating and cooling modes.
How to use the self-diagnosis feature to identify error codes.
Detailed explanation of each button on the remote control unit.
Step-by-step guide to safely remove the indoor unit's front grille.
Procedures for removing the control box and the evaporator unit.
Steps to remove the motor cover and the cross-flow fan assembly.
Instructions for safely removing the heater element from the unit.
Schematic diagrams for the electric control device, including heat pump models.
Identification of component locations on the main printed circuit boards.
Location of components on the display assembly for troubleshooting.
Visual representation of the refrigeration cycle for different unit types.
Guidelines for maximum pipe length and elevation differences.
Troubleshooting common issues related to 2-way and 3-way valves.
Procedures for air purging, pumping down, and gas charging.
Analysis of cycle parts and performance based on temperature and current.
Troubleshooting steps for electronic parts and main PCB issues.
Diagnosing and resolving issues related to the remote controller.
Troubleshooting compressor and outdoor fan drive failures.
Diagnosing problems with the indoor fan and vertical louvers.
Troubleshooting common issues when the heating mode does not operate.
Checks for outdoor components like compressor, fan, and 4-way valve.
Visual breakdown of all parts comprising the indoor unit.
Visual breakdown of all parts comprising the outdoor unit.
Comprehensive list of part numbers for the indoor unit.
Comprehensive list of part numbers for the outdoor unit.
To Next Page
