To Next PageTo Next Page
Need help?Do you have a question about the LG LS-H0560CL and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Energy Efficiency Ratio (EER) | 11.0 |
| Refrigerant | R410A |
| Power Supply | 220V, 60Hz |
| Operating Temperature (Cooling) | 18°C to 43°C |
Guidance on choosing optimal locations for indoor and outdoor units, considering airflow and obstructions.
Steps for cutting pipes, removing burrs, flaring ends, and protecting the finished flare.
Instructions for connecting the indoor unit piping to the outdoor unit, including tightening flare nuts.
Steps for removing the control cover and connecting the wires to the outdoor unit terminals.
Detailed steps to remove air from the refrigeration cycle, including valve operations and leak checks.
Steps for connecting the power supply and preparing the remote control for initial operation.
How to measure intake/discharge air temperatures and ensure the correct temperature difference.
Analyzes temperature differences and operating current to diagnose refrigerant issues.
Guides on checking suction pressure against normal values and identifying causes of deviation.
Troubleshooting steps for a completely non-operational unit, checking power and main components.
Table detailing PCB components, their expected voltage/state, and recommended remedies.
Troubleshooting steps for issues where the unit does not respond to the remote controller.
Diagnosing why the compressor or outdoor fan fails to operate, checking sensors, relays, and wiring.
Troubleshooting steps when the indoor fan fails to operate, checking connections, fuse, and TRIAC.
Steps to diagnose issues with the vertical louver, checking motor gearing, connectors, and circuit.
Lists phenomena and their causes related to incorrect connector types and conditions in the indoor unit.
