LG LS-P0960HL - Routing for Left-Side Piping Installations

3. Route the indoor tubing with the drain
hose to the piping hole as desired
position.
Outdoor
Piping
Indoor
Connecting cable
Indoor/outdoor
connecting cable
Taping
Connecting
cable
Gas side piping
Liquid side piping
Drain hose
ƒ¡27ƒ¡
Tubing holder
Press1
Pull2
To remove the holder,
press the bottom of the
chassis near the holder
upwards and pull the tab
out of its hole.
For the left pipings
4. Insert the pipings and the connecting cable
into the piping hole.
5. Insert the connecting cable into the indoor unit.
• Do not connect the cable to the indoor unit.
• Make a small loop with the cable for easy connec-
tion later.
6. Tape the tubing, drain hose and the connecting
cable.