K
Kenneth KellerAug 8, 2025
Why is my LG Air Conditioner leaking refrigerant?
- RRoger EdwardsAug 8, 2025
If your LG Air Conditioner experiences refrigerant leakage, it could stem from a clog in the refrigeration cycle or a defective compressor.
To Next PageTo Next PageWhy is my LG Air Conditioner leaking refrigerant?
If your LG Air Conditioner experiences refrigerant leakage, it could stem from a clog in the refrigeration cycle or a defective compressor.
Why doesn't the high pressure rise quickly at the beginning of operation in my LG LS-K1860YL?
If your LG Air Conditioner's high pressure doesn't rise quickly at the start, it might be due to an excessive amount of refrigerant.
What causes low current in my LG LS-K1860YL?
If the current is low in your LG Air Conditioner, this could be caused by a defective compressor or a defective 4-way reverse valve.
Why does my LG Air Conditioner have higher suction pressure and normal temperature?
If your LG Air Conditioner has higher suction pressure and normal temperature, it might be due to an excessive amount of refrigerant. In this case, high pressure does not quickly rise at the beginning of operation.
What causes higher suction pressure and high temperature in my LG LS-K1860YL Air Conditioner?
If your LG Air Conditioner has higher suction pressure and high temperature, this could be caused by a defective compressor or a defective 4-way reverse valve. The current is low.
General| Brand | LG |
|---|---|
| Model | LS-K1860YL |
| Category | Air Conditioner |
| Language | English |
Details on indoor unit operations like fan speed, modes, and controls.
Explains outdoor unit operations including controls, protection, and motor speed.
Explains various remote control functions like ON/OFF, mode selection, and timers.
Provides technical data for cooling and heating capacities, power, and dimensions.
Detailed measurements and piping hole locations for indoor units.
Detailed measurements for outdoor unit dimensions, including L1 to L10.
Illustrates the refrigerant flow and specifies pipe sizes and lengths.
Wiring diagrams for LS-_NL, LS-_NM/NN, and LS-K18612L indoor units.
Wiring diagrams for outdoor units corresponding to indoor models.
Explains the meaning of LED indicators on the indoor unit during operation.
Details how the power display indicates compressor operating frequency levels.
Covers protection against frosting, droplet formation, and fan operation.
Describes the operation of cooling mode, including compressor frequency.
Details healthy dehumidification and heating mode operations.
Explains fuzzy logic for cooling, heating, and dehumidification modes.
Details jet cool and chaos swing modes for airflow direction control.
Explains sleep timer functions and auto restarting operation after power failure.
Describes how to operate the unit manually when the remote is lost.
Details protection against total current, DC peak current, and overheating.
Explains the defrosting process in heating mode to prevent freezing.
Guidelines for selecting installation locations and piping requirements.
Steps for mounting the installation plate and drilling wall holes for piping.
Procedures for correct flaring work and pipe connection.
Steps for connecting piping, drain hose, and cable to the indoor unit.
Steps for connecting piping and drain hose to the outdoor unit.
Instructions for connecting the electrical cables between indoor and outdoor units.
Covers checking drainage, forming piping, and drain piping methods.
Procedures for air purging, leak testing, evacuation, and refrigerant charging.
Steps for checking performance, refrigerant charge, and air temperature differences.
How to collect all refrigerant in the outdoor unit for servicing.
Guides for analyzing temperature differences and refrigerant pressures.
Explains error codes and malfunction indicators for indoor and outdoor units.
Precautionary measures and general diagnosis steps before servicing.
Troubleshooting steps for specific electronic parts and circuit issues.
Diagrams of main, outdoor, sub PCBs, and schematic diagrams for various models.
Illustrated breakdown of indoor unit parts with part numbers.
Illustrated breakdown of outdoor unit parts with part numbers.
