10.Set the pipings and the connecting cable to the
back of the chassis with the tubing holder.
11. Indoor unit installation.
• Hook the indoor unit onto the upper portion of instal-
lation plate. (Engage the two hooks of the rear top
of the indoor unit with the upper edge of the installa-
tion plate.)
Ensure the hooks are properly seated on the instal-
lation plate by moving it in left and right.
Press the lower left and right side of the unit
against the installation Plate until the hooks
engages with their slots(sound click).
ƒ¡29ƒ¡
To Next Page
Loading...
