ENGLISH
30
No Signal Image
(Depending on model)
• Set to On or O.
• It is a mode to decide whether to use no signal image when there is no signal.
DPM
(Depending on model)
(On Europe models, it is indicated by DPM (Standby Mode))
• You can congure the DPM (Display Power Management) function.
• If this option is not set to O, the TV set enters the DPM mode when there is no input signal.
• If you set this option to O, the DPM function is disabled.
PM Mode
(Depending on model)
• Power O (Default)
-
Set the normal DC Off mode.
• Sustain Aspect Ratio
-
Set the power mode of the HDMI Switching IC, which detects HDMI external input signals in the TV Standby state after DPM Power Off
turns off the TV.
• Network Ready
-
Set the Active Standby mode when TV turns off.
-
TV seems to be turned off but it keeps to be on.
-
TV goes through the normal DC On process when it turns on.
Healthcare Headphone Mode
(Depending on model)
• Healthcare Headphone On
-
Mute is always applied to TV Speaker.
-
Sound Out menu is displayed as Internal TV Speaker + Wired Headphone, and all Sound Out submenus are gray out (Disable).
-
Internal TV Speaker / Headphone Simultaneous output, Volume key is adjust TV volume (Mute off).
-
Select TV Speaker User Interface. Volume key adjusts the internal TV Speaker volume.
-
Select Headphone User Interface. Volume key adjusts the headphone volume.
• Healthcare Headphone O
-
Sound Out Normal Scenario on Commercial Hotel TV.
-
Sound Out has Menu in default mode (Internal TV Speaker + Audo Out (Optical)).
Screen Saver
(Depending on model)
• When the currently displayed app has not received any user input for an hour, it will be replaced by a Screen Saver.
• If you turn this option ‘O’, the current picture may create an afterimage burned onto your screen, possibly permanently.
Default Sound Out
(Depending on model)
• You can congure the Sound Out to be set after power on.
• You can select O, TV Speaker, Optical, LG Sound Sync., HDMI ARC (Depending on model)
• If you set this option to O, the TV maintains Sound Out after power on.
• If you set this option to HDMI ARC, SIMPLINK is enabled.
• If a SIMPLINK-enabled device is connected to the TV and item SIMPLINK is enabled, the SIMPLINK device Audio Mode will have priority over the
setting of this item when the TV is turned ON.
To Next Page
Loading...
Need help?
General
